Happy Haunting Pumpkin

This is the last of the decoupaged pumpkin posts. I had a large ivory pumpkin sitting around my studio for a couple of weeks waiting to become a project. Frankenstein is as much a part of Halloween as vampires, mummies and witches, so why not do a Frankenstein themed pumpkin? I chose the image from my "go to" Halloween cartridge (Happy Hauntings) and loaded it into the Cricut machine. This project went together very quickly- about an hour.  This pumpkin is not intended for long term outdoor use. I do intend to display the finished pumpkin on my porch on Halloween night but am using it as an indoor display until then.

Frankenstein Pumpkin

Directions for Frankenstein Pumpkin:

Modge Podge
Foam brush
Modge Podge sealant
Cricut Happy Hauntings cartridge
Black, dark green (a shade darker than the light green), light green, orange and white card stock
Recollections small gold crystal for the eyes and buttons
K&Company Tim Coffey Halloween Paper stack- for the two pumpkins
K&Company Tim Coffey Halloween Bone and Bats Layered Accents-for the bats

1.  Using the Happy Hauntings cartridge cut Frankenstein at 6 inches. Assemble Frankenstein.  Cut the cat at 3 inches. Cut the cat's bow out of a scrap of purple, green or orange card stock. Assemble the cat. Cut Happy Hauntings at 1 1/2 inches out of orange card stock (press Phrase and Frame 9), then cut the word base out of black card stock (press Phrase, Shift and Frame 9). Assemble the phrase.

2.  Apply Modge Podge liberally to the back of Frankenstein and the cat with a foam brush. Place Frankenstein on the pumpkin and the cat to his left. Press the images in place, making sure that the edges of the image are glued to the pumpkin.  Apply Happy Hauntings at the top of the pumpkin, over Frankenstein's head.

3.  Cut two pumpkins from the Tim Coffey pumpkin patterned paper. Apply Modge Podge to the back of the pumpkins and place to the right of Frankenstein's foot.

4.  Coat all of the images on the pumpkin with Modge Podge as set aside to dry. After the images are completely dry, attach the gold crystals to Frankenstein's coat and the cat's eyes.

5.  Using three bats from the Tim Coffey Layered Accents, carefully scrape the foam dots off of the back of the bats. Apply Modge Podge to the back of the bats and glue them to each side of the phrase and below the phrase, slightly to the right of Frankenstein's head.

6.  Apply a coat of Modge Podge to all of the images. Be careful not to dislodge the crystals. Set aside to dry. When the Modge Podge is completely dry, spray the front of the pumpkin with Modge Podge sealant.

Decoupaged Pumpkin

 Halloween is always a fun holiday. I love answering the door and seeing the neighborhood kids in their costumes and having the chance to talk with neighbors that I only see a couple of times a year. It's also a busy holiday for me-baking and shipping Bat Cookies to Brittany and Michelle, decorating and sprucing up the front of the house. Today was warm and sunny so I spent the afternoon painting the trim around the door and windows. For a brief moment I thought about covering the areas that needed painting with craft store spider web material for a true haunted house look and going off into my studio to work on my decorations. I grabbed the paint and paint brush and headed out doors to paint. C'est la vie!

I'm really glad that I did the painting because it only took about 2 hours and I had the rest of the afternoon to work on my decorations (guilt-free). I really like the idea of craft pumpkins. They can be decorated and then stored away and re-used in the future. Rather than carve a real pumpkin to sit out on my porch, I decided to decorate craft pumpkins instead. I am working on the first of three decorated pumpkins, using Cricut and Modge Podge  I am posting this as I am working on it (the Modge Podge hasn't completely dried). As with all decoupage projects this will take several coats of Modge Podge over several days.

Directions for Decoupaged Craft Pumpkin:

Medium size Craft Pumpkin- available at Michaels
Cricut Happy Hauntings cartridge
Black, brown, orange, yellow and white card stock
K&Company Kelly Panacci Halloween Paper Pad- purple dotted card stock
EK Success circle cutter
Sizzix Sizzlets Bat die
Sizzix Big Kick or similar die cut machine
Modge Podge Clear Gloss
Colored pencils
Googly eyes
Modge Podge spray sealant
foam brush for applying Modge Podge

1.  Using the Cricut Happy Hauntings cartridge cut the Owl at 4 inches out of black card stock. Press the Owl and Shift keys to cut the branch out of brown card stock. Press the Layer 1 key to cut the eyes out of white card stock. Press Layer 1 and Shift to cut the feet and beak out of orange card stock. Finally, press Layer 2 to cut the stomach and upper part of the head out of purple dotted card stock. Assemble the owl. Accent the branch, feet, beak and stomach with colored pencils. Glue two small googly eyes to the Owl's face.

2.  Cut two sets of Bats (out black card stock) using the Sizzix.

3.  Use the circle cutter to cut a yellow circle for the moon.

4.  Glue the Owl to the front of the pumpkin with Modge Podge. Glue the moon slightly above the Owl's head on the upper right side. Glue a small Bat to the left edge of the moon. Randomly glue the rest of the Bats to the upper portion of the pumpkin.

5.  Apply a light coat of Modge Podge to the pumpkin and set aside to dry. Repeat the process until you have applied four coats. After the final coat of Modge Podge is dry spray the pumpkin with Modge Podge sealant.

Franken Diva

For days those of us who live on the East Coast have been warned of the impending arrival of Hurricane Sandy. My family made the necessary emergency preparations for the arrival of Sandy. We are not near any water sources and our house sits on a hill so we are expecting a lot of rain, high winds and possible power outages. Fortunately we are not in an area where we are forced to evacuate and can wait the storm out at home. While I am waiting out the storm, I decided to head off to my Atelier to work on some projects. While I still have power (although the lights flickered while I am typing this) I fired up the Cricut and cut the necessary shapes. My drafting table faces the window and every time I look up from my work I can see the trees swaying wildly in the wind and rain furiously, pounding on my window.

Just in time for Halloween, Cricut released the Frightful Affair cartridge. The images on this cartridge are a little more sophisticated than the cutesy Halloween cartridge that they previously released. I like both types of cartridges and like have a variety of images. My favorite image on this cartridge is the Bride of Frankenstein. She is not the same old Bride of Frankenstein that one encounters every where but a "Bride" with attitude.  I was looking for a background for my Hello Kitty Halloween project and had the purple paper laying on my desk. The color didn't work for Hello Kitty but it would be perfect for the "Bride". I viewed her as a bit of a diva and decided to work from there.

 Here's the finished card. Oh, did I mention that I love bats and that they are a must for my Halloween cards?



Directions for Franken Diva Halloween Card:

Black, cream, light grey and yellow card stock
K&Company Kelly Panacci Halloween paper- purple with black dots and black with black glitter design
Cricut A Frightful Affair cartridge
Martha Stewart Iron Fence border punch
Stickles glitter glue-Ice Stickles
Recollections self adhesive pearls, Halloween crystals, small clear crystal
Black ribbon with silver spider web design
Sizzix die cutting machine
Sizzix bat die


1.  Fold an 8 1/2 by 11 inch piece of light grey card stock in half to make a card.

2.  Cut a piece of black card stock with black glitter design approximately 7 3/4 inches high by by 4 3/4 inches wide. Cut the purple dotted card stock approximately 6 3/4 inches high by 4 1/2 inches wide. Glue the purple dot card stock on top of the black card stock leaving a border of approximately 1/4 on all sides.

3.  Cut nine bats using the Sizzix machine and bat die. If you don't have the Sizzix bat die, you can substitute any bats (Cricut, etc.) You want the bats to be fairly small with long wings and small bodies.

4.  Cut a small round circle out of yellow card stock. I used a circle template just because I had one available, but you can use any small circle shaped object as a template.

5.  Use the Martha Stewart Iron Fence border punch to punch a fence out of black card stock. Trim the fence to fit the purple and black dotted card stock. Glue the fence to the bottom edge of the purple and black dotted card stock.

6.  Using the Cricut Frightful Affair cartridge cut the "Bride" 's dress out of black card stock at 5 1/2 inches. Press the shift and "Bride" key.  Next cut the "Bride" out of light cream card stock by pressing the "Bride" key.  Assemble the "Bride". Use a fine tip red marker to draw in her mouth.

7.  Center the "Bride" on the purple and black dotted card stock and glue her in place slightly above the bottom edge of the fence. Use Ice Stickles to fill in the white streak in the "Bride" 's hair. Add a small self adhesive pearl to the bolt on the side of her head. Apply 3 small pearls to her wrist to make a bracelet. Apply one small clear crystal to her ring finger and apply a golden Halloween crystal to the neckline of her dress.

8.  Apply 2 small and 2 medium purple Halloween crystals to the fence posts.

9.  Glue the yellow circle to the top right corner of the purple and black dotted card stock to make a moon.

10.  Gently fold the bat's wings upward to give them the illusion of flight. Glue 2 bats on the moon and glue the rest of the bats randomly around the top of the card.

11.  Center the black and black glittered card stock base on the light grey card stock and glue it in place.

12.  Tie a small bow out of the black ribbon and glue it to the bottom of the card.